NOKIA 6680 Power ON/OFF And Keypad solution,
Showing posts with label power. Show all posts
Showing posts with label power. Show all posts
Thursday, November 20, 2014
Nokia N82 Power ON OFF Switch Ways Repair with Jumpers
Here is diagram of Nokia N82 Power Switch ways, that explains show ON/OFF switch ways, helpful to reapir Power switch with jumpers if prints are broken/Damaged.
Tuesday, November 18, 2014
Monday, October 27, 2014
Nokia X5 01 Menu Send Power ON OFF and Navigation keypad flex solution
This is a solution for nokia X5-01 upper keypad flex that is not working or functioning. If encountered a problem like the Send, Music, S60-L, Soft left, Soft right, Left, Right, Up, Down, Select and the End / power button keys that is not working this solution may possibly help fix the problem.
The following solution shows the flex keypad connection line paths for easy tracing and check up procedures. This can be also used to locate where and which components needs to be check and or where can apply and put a jumper when theres a line being cut or open due to wet or water damaged.
In troubleshooting upper keypads you must first visually check the flex assembly for possible damaged, scratched or cut. A damaged flexible cable wire assembly needs to be replaced a new replacement spare.
However, if there is only one key that is not working except the END/POWER key, you may refer this solution below for it shows the connection line paths of the upper keypad keys board on the flex assembly.
The Send, Music, S60-L, Soft left, Soft right, Left, Right, Up, Down, Select and the End / power button keys connection used filter coils that is mounted or located at the back side of flex. If only one key is not working except the power key , you may first trace the corresponding line paths and filter coil connected to it, then just replace or mend to reconnect the open or cut line paths. If there is two or more keys that is not working you may suspect that the flex is already damaged it is because the solution shows that there are minimum of two certain keys shared in one line paths except the power on/off button.
The next solution below can be used for further upper keypad keys breakdown or failure. This solution can be used if the keypad flex is already been tried installing a new replacement flex ribbon wire, for it shows the complete connection line paths from the flex pin connector to the keypad filter IC solder ball bumps.
If already tried installing a new flex cable wire but still the keypads keys still doesnt work, you may need to replace the Keypad filter IC located or mounted near the Flex pin connector. You can also temporarily apply the jumper solution just to determine if all the connection line paths is working okay.
The following solution shows the flex keypad connection line paths for easy tracing and check up procedures. This can be also used to locate where and which components needs to be check and or where can apply and put a jumper when theres a line being cut or open due to wet or water damaged.
In troubleshooting upper keypads you must first visually check the flex assembly for possible damaged, scratched or cut. A damaged flexible cable wire assembly needs to be replaced a new replacement spare.
However, if there is only one key that is not working except the END/POWER key, you may refer this solution below for it shows the connection line paths of the upper keypad keys board on the flex assembly.
Nokia X5-01 Upper Keypad Flex Line Connection Tracks
The next solution below can be used for further upper keypad keys breakdown or failure. This solution can be used if the keypad flex is already been tried installing a new replacement flex ribbon wire, for it shows the complete connection line paths from the flex pin connector to the keypad filter IC solder ball bumps.
Nokia X5-01 Keypad IC jumper ways and pin connector line tracks
Tuesday, October 14, 2014
Thursday, October 2, 2014
Nokia E73 Power ON OFF Jumper Ways Solution
Nokia E73 Power ON OFF switch jumper ways - tracks
Sunday, September 21, 2014
Asha 305 Asha 306 Power Button Ways Jumpers
This post is for Nokia Asha 305 and Nokia Asha 306 Power Button Ways and Jumpers. It works for both of these phones.
Power button for these phones often gets faulty if it has carbon or moisture on it. So before doing any hardware solutions clean the power button and the general area around it. I have marked power button jumper points in the diagram below.
Please Note that we will edit these solutions or add new ones if found in this page at any time in the future. So feel free to come back any time on this page to stay up to date.
If you have further Questions please dont hesitate to leave a comment.
Note: Every repairing solution posted here is tested by at least one member of our team. Use the information available here at Your Own Risk. We are not responsible if any harm comes to your device during the repairing process.
Tuesday, September 16, 2014
Nokia 1280 On Of Power Key Ways Jumper Solution 100 Tested
Nokia 1280 Power switch ways.
Read More..
Wednesday, September 10, 2014
Nokia x6 power switch button ways jumpers solution
if charging is ok but not getting power on nokia x6 it means the power switch is not working ok so you have to change power switch button in this situation in nokia x6.if power button is damage and prints are also damage this diagram is too much useful it this condition.so make these jumpers as shown in diagram attached with this post.
![]()
for more detail and new tips and tricks about this problem keep visiting this page we will update it timely with new diagrams.some related post are also given bellow you can read them also for more information
for more detail and new tips and tricks about this problem keep visiting this page we will update it timely with new diagrams.some related post are also given bellow you can read them also for more information
Tuesday, September 2, 2014
Samsung i9003 Power Button Ways fix problem
Sunday, August 31, 2014
nokia c5 only vibrate no power on
nokia c5 only vibrate no power on problem can be cause of water damages. So after disassemble clean the whole mother board and apply hot air to make it dry. Do not apply much hot air to because it may can harm your skin and damage the board.
In the above diagram you can see a resistance remove this if only cleaning the board can not solve nokia c5 only vibrate no power on problem.
In the above diagram you can see a resistance remove this if only cleaning the board can not solve nokia c5 only vibrate no power on problem.
Thursday, August 28, 2014
NOKIA 6680 Power ON OFF And Keypad solution
NOKIA 6680 Power ON/OFF And Keypad solution,
if you check it much give few comments about this so that others can learn form your comments also.
If you have any other Questions please do not hesitate to share with me.
If you have any other Questions please do not hesitate to share with me.
Subscribe to:
Posts (Atom)
