GSM Learning solution: How to Install T111XXUBNB2 Android 4 2 2 Jelly Bean Firmware

Monday, November 17, 2014

Download Android 4.2.2 XXUBNB2 Firmware for Galaxy Tab 3 7.0 Lite T111 from the above list
Download Odin 3.09
Switch off your Tablet and boot Galaxy Tab 3 7.0 Lite T111 into Download Mode by pressing and holding the Volume Down and Power keys together until you get the warning message, now press Volume Up key to proceed to Download Mode..
Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
Now connect your Galaxy Tab 3 7.0 Lite T111 to your computer via USB cable
In Odin3 Lcd, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
In Odin Lcd, click on PDA button and select the firmware file with .tar.md5 extension (The firmware file look something like: T111XXDLJ5_T111ODDDLI7_INU.tar.md5)
Now, click on the Start button to begin the installation process, wait few moments.
Once completed, you would see “PASS!” message in ID:COM port having green background
Your Tablet should automatically reboot after completion
You can now disconnect your Tablet from computer
Finish