GSM Learning solution: install

Showing posts with label install. Show all posts

Monday, November 17, 2014

How to Install T111XXUBNB2 Android 4 2 2 Jelly Bean Firmware

Install Android 4.2.2 Jelly Bean Official Firmware on Galaxy Tab 3 7.0 Lite T111 through Odin:

Download Android 4.2.2 XXUBNB2 Firmware for Galaxy Tab 3 7.0 Lite T111 from the above list
Download Odin 3.09
Switch off your Tablet and boot Galaxy Tab 3 7.0 Lite T111 into Download Mode by pressing and holding the Volume Down and Power keys together until you get the warning message, now press Volume Up key to proceed to Download Mode..
Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
Now connect your Galaxy Tab 3 7.0 Lite T111 to your computer via USB cable
In Odin3 Lcd, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
In Odin Lcd, click on PDA button and select the firmware file with .tar.md5 extension (The firmware file look something like: T111XXDLJ5_T111ODDDLI7_INU.tar.md5)
Now, click on the Start button to begin the installation process, wait few moments.
Once completed, you would see “PASS!” message in ID:COM port having green background
Your Tablet should automatically reboot after completion
You can now disconnect your Tablet from computer
Finish

Wednesday, October 1, 2014

How To Guide Install XXUBML2 Android 4 2 2 JB Firmware on Galaxy S4 Active GT I9295

Samsung launches Android 4.2.2 firmware update XXUBML2 official Jelly Bean for Galaxy GT-I9295 Active S4. The firmware update launched in several countries including Switzerland, and also can be downloaded for manual updates. Hold I9295 Galaxy S4 Active smartphone is water and dust comes with Jelly Bean Android 4.2.2 out of the box, this new firmware update just brings bug fixes and performance tweaks. Continue reading this guide to learn how to get the stock Android 4.2.2 official I9295XXUBML2 Jelly Bean firmware running on the Galaxy GT-I9295 Active S4. Almost all of the possible ways to update your device to this firmware discussed here. One thing should be noted that the official firmware flashing or install kernel then restore root access you will fail, in short it will unroot it.

I9295XXUBML2 Jelly Bean Android 4.2.2 stock firmware that is available in both OTA and Kies update. However, if you can not get it from there then you can always blink I9295XXUBML2 Jelly Bean Android 4.2.2 firmware on Galaxy GT-I9295 Active S4 manual. We will discuss all the methods available updates. You should always try OTA or Kies method first and when the two methods do not work then just try flashing manually.

Pre Requisites:

Though official firmware restore all existing data but we recommend to back up your data first before proceeding to avoid any uncomfortable situation such as bootloop fix.

1. Backup your device data.

2. Make sure your device have at least 60% battery power. You can install an app like Battery Notifier BT Free on your Android device to check it easily.

3. You already have USB Driver Installed for Galaxy S4 Active GT-I9295 in your PC. Download USB Drivers

4. Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and Galaxy S4 Active GT-I9295.

Warning: This tutorial is only for Galaxy S4 Active GT-I9295. Don’t try this guide on any other Android device. Also, we are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.

How To Update Galaxy S4 Active GT-I9295 via OTA

First of all make sure you have stable internet connection (Wi-Fi or data network) on your device.
Now, go to Android app drawer and then select Settings.
Then locate About Device and tap on it.
Next select Software update from About device Lcd.
Then tap on Update option.
You should see an update, press OK to download and install. (Remember, download using 3G or network data will incur additional charges to your phone bill!)
Soon your device will reboot to complete the installation process.

If you see “The latest update have already been installed” massage while checking update then your device yet to receive an OTA update. Check back within few days or jump to next procedure.

How To Update Galaxy S4 Active GT-I9295 via Kies

Make sure you have stable internet connection on your computer.
Now download and install Samsung Kies on your computer.
Turn on your device (if it off) and then connect it to computer with USB cable.
Run Samsung Kies and wait for it to detect your device.
You should see a New Firmware Upgrade is available at Samsung Kies home Lcd.
Press the Firmware Upgrade button to proceed.
Follow on Lcd instruction and soon you will see your device running upgrade and reboot automatically. Once done, you can disconnect your device from computer.

Again! If you see “This is the latest firmware” in Samsung Kies, then your device yet to receive the latest update on Kies. Its good time to go for manual update instruction that located below.

I9295XXUBML2 Android 4.2.2 Jelly Bean Firmware Details:

PDA: I9295XXUBML2

CSC: I9295AUTBML1

Download: AUT-I9295XXUBML2-20131223112203.zip | Mirror

Please Note: After flashing this firmware you will lost any installed custom ROM including CM10.2, AOKP, Avatar,Beanstalk, Omni ROM, Slim ROM, Pac-Man, Paranoid Android, LiquidSmooth or Carbon.

How To Install I9295XXUBML2 Android 4.2.2 Jelly Bean On Galaxy S4 Active GT-I9295 Manually

Download Odin v3.09.
Extract Firmware zip file that you downloaded earlier from above link, you will get a .tar.md5 file and some other files (optional).
Extract Odin zip file and you will get Odin3 v3.09.exe along with few other files.
Power off your Android device. Wait 5-6 seconds for vibration to confirm complete switch off.
Now, put the Galaxy S4 Active GT-I9295 in Download Mode by pressing and holding down the Home &Volume Down button together while pressing the Power button. A warning Lcd will come up; press Volume Up button to enter Download Mode.
Now run Odin3 v3.09.exe (see Step 3) as an Administrator because Admin privileges is required to complete the process smoothly (only applicable Windows Vista and higher).
Now connect your device to your PC using USB cable. An “Added!!” massage will appear in Odin’s message box. If you don’t get the same then you should try another USB port (try USB port located in back in your desktop PC). If that too don’t work then you should reinstall the driver. If you successfully see the “Added!!” message in Odin then you are ready to go in next step. You should also see COM port with a number in Yellow if you successfully added your device.
Click the AP Button, and select that .tar.md5 file that you get in Step 2.
In Odin window, make sure only Auto Reboot and F. Reset Time checkboxes are selected.
Double check everything that we mentioned in Step 8 & Step 9 above. Now, once satisfied hit the START button to begin the flashing process.
Once flashing completed, your Galaxy S4 Active GT-I9295 will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Congrats! You just updated your Galaxy S4 Active GT-I9295 to Android 4.2.2 Jelly Bean firmware. Go to Settings > About device to verify this firmware update.

Fix Boot Loop Issue On Galaxy S4 Active GT-I9295

If Galaxy S4 Active GT-I9295 stuck at booting animation for more than 10 minutes after Step 11 then follow below instructions:

Go to recovery mode. To do so, press and hold the Volume Up, Home and Power buttons together.
Now perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option.

Please note, performing wiping task will erase your device internal memory data and not external SD card data.

That’s it! Let us know about your latest Android 4.2.2 Jelly Bean experience.

Friday, September 26, 2014

Download Install Micromax Blow Air to Unlock Shake Unlock App for Any Android Phone

Micromax India yesterday launched a new Smart Phone called as the Canvas 4 which came up with some interesting features which we had listed yesterday in our blog post. One of those feature was the lock Lcd application which allows you to Unlock your Phone by just blowing air onto the Lcd or by just shaking the device.

Just download the APK file from the link given below and then proceed to the installation of this app. Ensure that you have enabled the option to “Allow installation of apps from sources other than the play store” from the Security section of your Phone. Once the app is installed, you would be asked to tap once on the same to Enable it following which you would get the lock Lcd active on your phone.

Download App Directly [From your Smart Phone]

Overall this a interesting application and a useful feature if you are bored with your current locking options. Check out the video above for a small demo of the same to know if this is useful for you or not. Thanks to Keanu for extracting this app from the Canvas 4 ROM.

Saturday, September 6, 2014

How To Install XXMK1 Android 2 3 6 GB Firmware on Galaxy mini 2 S6500D

Samsung launched xxmk1 android 2.3.6 updates firmware official gingerbread to the galaxy mini 2 gt-s6500d. Updates firmware launched in various countries, including spain and may also be downloaded to update manual. This update firmware new only bring the bug and a tweak performance mini gt-s6500d galaxy 2 on you. Continue read guide it to learn how to get official stock s6500dxxmk1 android 2.3.6 gingerbread firmware running at galaxy mini 2 gt-s6500d. Almost all possible means to update the you to firmware is discussed here. One thing to be noted that flinching or install firmware official restore kernel and you shall be void, access root eavesdropper will unroot it.

S6500dxxmk1 android 2.3.6 gingerbread firmware stock that is available in both ota and kies renewal. However, if you can t get it out of there and you can always blink s6500dxxmk1 android 2.3.6 gingerbread firmware in the galaxy mini 2 gt-s6500d manual. We will discuss all those methods updates available. You should always try ota or method of kies first and when the second method does not work so just trying to flashing manual.

Pre Requisites:
Though official firmware restore all existing data but we recommend to back up your data first before proceeding to avoid any uncomfortable situation such as bootloop fix.

1. Backup your device data.
2. Make sure your device have at least 60% battery power. You can install an app like Battery Notifier BT Free on your Android device to check it easily.
3. You already have USB Driver Installed for Galaxy mini 2 GT-S6500D in your PC.Download USB Drivers
4. Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and Galaxy mini 2 GT-S6500D.

Warning: This tutorial is only for Galaxy mini 2 GT-S6500D. Don’t try this guide on any other Android device. Also, we are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.

How To Update Galaxy mini 2 GT-S6500D via OTA

First of all make sure you have stable internet connection (Wi-Fi or data network) on your device.
Now, go to Android app drawer and then select Settings.
Then locate About Device and tap on it.
Next select Software update from About device screen.
Then tap on Update option.
You should see an update, press OK to download and install. (Remember, download using 3G or network data will incur additional charges to your phone bill!)
Soon your device will reboot to complete the installation process.

If you see “The latest update have already been installed” massage while checking update then your device yet to receive an OTA update. Check back within few days or jump to next procedure.

How To Update Galaxy mini 2 GT-S6500D via Kies

Make sure you have stable internet connection on your computer.
Now download and install Samsung Kies on your computer.
Turn on your device (if it off) and then connect it to computer with USB cable.
Run Samsung Kies and wait for it to detect your device.
You should see a New Firmware Upgrade is available at Samsung Kies home screen.
Press the Firmware Upgrade button to proceed.
Follow on screen instruction and soon you will see your device running upgrade and reboot automatically. Once done, you can disconnect your device from computer.

Again! If you see “This is the latest firmware” in Samsung Kies, then your device yet to receive the latest update on Kies. Its good time to go for manual update instruction that located below.

S6500DXXMK1 Android 2.3.6 Gingerbread Firmware Details:

PDA: S6500DXXMK1
CSC: S6500DPHEMK1
Download: S6500DXXMK1_S6500DPHEMK1_PHE.zip

Please Note: After flashing this firmware you will lost any installed custom ROM including CM10.2, AOKP, Avatar,Beanstalk, Omni ROM, Slim ROM, Pac-Man, Paranoid Android, LiquidSmooth or Carbon.

How To Install S6500DXXMK1 Android 2.3.6 Gingerbread On Galaxy mini 2 GT-S6500D Manually

Download Odin v3.09.
Extract Firmware zip file that you downloaded earlier from above link, you will get a .tar.md5 file and some other files (optional).
Extract Odin zip file and you will get Odin3 v3.09.exe along with few other files.
Power off your Android device. Wait 5-6 seconds for vibration to confirm complete switch off.
Now, put the Galaxy mini 2 GT-S6500D in Download Mode by pressing and holding down the Home &Volume Down button together while pressing the Power button. A warning screen will come up; press Volume Up button to enter Download Mode.
Now run Odin3 v3.09.exe (see Step 3) as an Administrator because Admin privileges is required to complete the process smoothly (only applicable Windows Vista and higher).
Now connect your device to your PC using USB cable. An “Added!!” massage will appear in Odin’s message box. If you don’t get the same then you should try another USB port (try USB port located in back in your desktop PC). If that too don’t work then you should reinstall the driver. If you successfully see the “Added!!” message in Odin then you are ready to go in next step. You should also see COM port with a number in Yellow if you successfully added your device.
Click the AP Button, and select that .tar.md5 file that you get in Step 2. If you are using old Odin then add the file to PDA button.
In Odin window, make sure only Auto Reboot and F. Reset Time checkboxes are selected.
Double check everything that we mentioned in Step 8 & Step 9 above. Now, once satisfied hit the START button to begin the flashing process.
Once flashing completed, your Galaxy mini 2 GT-S6500D will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Congrats! You just updated your Galaxy mini 2 GT-S6500D to Android 2.3.6 Gingerbread firmware. Go to Settings > About device to verify this firmware update.

Fix Boot Loop Issue On Galaxy mini 2 GT-S6500D

If Galaxy mini 2 GT-S6500D stuck at booting animation for more than 10 minutes after Step 11 then follow below instructions:

Go to recovery mode. To do so, press and hold the Volume Up, Home and Power buttons together.
Now perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option.

Please note, performing wiping task will erase your device internal memory data and not external SD card data.

That’s it! Let us know about your latest Android 2.3.6 Gingerbread experience.

How To Guide Install XXUBML5 Android 4 3 JB Firmware on Galaxy S4 LTE A GT I9506

Samsung launches Android 4.3 Jelly Bean XXUBML5 official firmware update for the Galaxy S4 LTE-A GT-I9506. The firmware update is launched in various countries including France, and also can be downloaded for a manual update. You can also update your device for the firmware via Kies or OTA update. Because this smartphone comes with Android 4.2.2 Jelly Bean out of the box, this new firmware will update your device to a better OS that Android 4.3 Jelly Bean. Continue reading this manual to learn how to get an official stock Android 4.3 Jelly Bean I9506XXUBML5 firmware running on the Galaxy S4 LTE-A GT-I9506. Almost all the possible ways to update your device to this firmware discussed here. One thing to note that flashing or installing the official firmware kernel then restore your root access will be canceled, in short it will unroot it.

Android 4.3 Jelly Bean I9506XXUBML5 stock firmware available in both OTA and Kies update. However, if you can not get it from there then you can always flash I9506XXUBML5 Android 4.3 Jelly Bean firmware on Galaxy S4 LTE-A GT-I9506 manual. We will discuss all the methods available updates. You should always try OTA or Kies method when the first and second method does not work then just try flashing manually.

Warning: This tutorial is only for Galaxy S4 LTE-A GT-I9506. Don’t try this guide on any other Android device. Also, we are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.

Pre Requisites:

Though official firmware restore all existing data but we recommend to back up your data first before proceeding to avoid any uncomfortable situation such as bootloop fix.

1. Backup your device data.

2. Make sure your device have at least 60% battery power. You can install an app like Battery Notifier BT Free on your Android device to check it easily.

3. You already have USB Driver Installed for Galaxy S4 LTE-A GT-I9506 in your PC. Download USB Drivers

4. Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and Galaxy S4 LTE-A GT-I9506.

How To Update Galaxy S4 LTE-A GT-I9506 via OTA

First of all make sure you have stable internet connection (Wi-Fi or data network) on your device.
Now, go to Android app drawer and then select Settings.
Then locate About Device and tap on it.
Next select Software update from About device screen.
Then tap on Update option.
You should see an update, press OK to download and install. (Remember, download using 3G or network data will incur additional charges to your phone bill!)
Soon your device will reboot to complete the installation process.

If you saw "The latest update has been installed" massage while checking for updates and the phone you have not received the OTA update. Check back in a few days or move on to the next procedure.

How To Update Galaxy S4 LTE-A GT-I9506 via Kies

Make sure you have stable internet connection on your computer.
Now download and install Samsung Kies on your computer.
Turn on your device (if it off) and then connect it to computer with USB cable.
Run Samsung Kies and wait for it to detect your device.
You should see a New Firmware Upgrade is available at Samsung Kies home screen.
Press the Firmware Upgrade button to proceed.
Follow on screen instruction and soon you will see your device running upgrade and reboot automatically. Once done, you can disconnect your device from computer.

Again! If you see “This is the latest firmware” in Samsung Kies, then your device yet to receive the latest update on Kies. Its good time to go for manual update instruction that located below.

Note: You can install any firmware listed below despite availability in other countries, except those which comes with carrier name.

I9506XXUBML5 Android 4.3 Jelly Bean Firmware Downloads

France (Orange): I9506XXUBML5_I9506FTMBML1_FTM.zip

Please Note: After flashing this firmware you will lost any installed custom ROM including CM10.2, AOKP, Avatar,Beanstalk, Omni ROM, Slim ROM, Pac-Man, Paranoid Android, LiquidSmooth or Carbon.

How To Install I9506XXUBML5 Android 4.3 Jelly Bean On Galaxy S4 LTE-A GT-I9506 Manually

Download Odin v3.09.
Extract Firmware zip file that you downloaded earlier from above link, you will get a .tar.md5 file and some other files (optional).
Extract Odin zip file and you will get Odin3 v3.09.exe along with few other files.
Power off your Android device. Wait 5-6 seconds for vibration to confirm complete switch off.
Now, put the Galaxy S4 LTE-A GT-I9506 in Download Mode by pressing and holding down the Home &Volume Down button together while pressing the Power button. A warning screen will come up; press Volume Up button to enter Download Mode.
Now run Odin3 v3.09.exe (see Step 3) as an Administrator because Admin privileges is required to complete the process smoothly (only applicable Windows Vista and higher).
Now connect your device to your PC using USB cable. An “Added!!” massage will appear in Odin’s message box. If you don’t get the same then you should try another USB port (try USB port located in back in your desktop PC). If that too don’t work then you should reinstall the driver. If you successfully see the “Added!!” message in Odin then you are ready to go in next step. You should also see COM port with a number in Yellow if you successfully added your device.
Click the AP Button, and select that .tar.md5 file that you get in Step 2.
In Odin window, make sure only Auto Reboot and F. Reset Time checkboxes are selected.
Double check everything that we mentioned in Step 8 & Step 9 above. Now, once satisfied hit the START button to begin the flashing process.
Once flashing completed, your Galaxy S4 LTE-A GT-I9506 will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Congrats! You just updated your Galaxy S4 LTE-A GT-I9506 to Android 4.3 Jelly Bean firmware. Go to Settings > About device to verify this firmware update.

Fix Boot Loop Issue On Galaxy S4 LTE-A GT-I9506

If Galaxy S4 LTE-A GT-I9506 stuck at booting animation for more than 10 minutes after Step 11 then follow below instructions:

Go to recovery mode. To do so, press and hold the Volume Up, Home and Power buttons together.
Now perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option.

Please note, performing wiping task will erase your device internal memory data and not external SD card data.